Cabinets in Roswell, GA
Shaker doors, a smooth finish and soft-close hinges, priced on a free estimate for your kitchen. You decide whether the old boxes stay.
Free estimate from a local cabinet pro. No obligation.
Get my free estimate
Or call (770) 790-5990. Calls only, we do not receive text messages.

Answered 24/7
This website provides independent cabinet buying information and project enquiries for Roswell. Check the existing cabinet boxes, retained countertops and room layout before deciding between refacing and replacement. Bring finish samples and measured drawings to the selected provider so their proposal addresses the actual room.
Refacing, before and after
Drag the handle: the same kitchen with new doors and fronts, boxes and layout untouched.

BeforeAfterCabinets chosen on the room, not the catalog
About 55 percent of Roswell's housing stock was built before 1990, one of the higher pre-1990 shares in north Fulton County. Most cabinet work here is for updating existing homes, not new construction. Whether the project is a historic district property with original millwork or a 1990s subdivision home with worn builder-grade cabinets, the goal is the same: restore function and character without compromising the home's integrity.
Roswell kitchen cabinets with a finish that still looks right up close
The risk with any update is the lipstick-on-a-pig kitchen: fresh paint on raised-panel oak that starts chipping at the handles before long. A finish that lasts starts with a door made to be painted or stained, not a coat over grain that fights it. Ask the estimate what the doors are made of and how they are finished, and you know what you are paying for.
- Everyone thinks paint is the cheap way out. On oak, it is often the way back in, a few years later.
- What a lasting painted door needs: a smooth material like maple or MDF, and a sprayed, cured finish.
- Change the doors to shaker and the whole kitchen reads like a new one, even with the same layout.
Free estimate from a local cabinet pro. No obligation.
Answered 24/7
Update Roswell's 1980s country-club kitchens without starting from scratch
Horseshoe Bend, Willow Springs and Martins Landing were built with framed cabinets, and some of those frames are still square and solid. The weak points are the raised-panel doors, the hinges and the particleboard shelves, and those can change without tearing out a granite top that still looks good. Whether your boxes qualify is the first thing to find out.
- The test is under the sink: soft, swollen particleboard there means the boxes go.
- Plus: keep a granite top you like, and new doors become a much smaller job than a full tear-out.
- Never pay to replace boxes that pass the test just because the doors look old.
Free estimate from a local cabinet pro. No obligation.
Answered 24/7
Historic Roswell kitchens with cabinets that respect the house around them
In a house that keeps its original moldings and trim, a slab-front modern kitchen can look dropped in from another street. Inset or framed doors, a finish that sits well beside old wood, and crown that meets the ceiling the way the rest of the house does keep the kitchen part of the home. It is a style question and a fit question at once.
- Why inset in an old house? The doors sit flush inside the frame, the way period furniture does.
- Old ceilings are seldom level, and crown run dead straight in a crooked room shows a gap. Ask how it gets scribed.
- Old house. New kitchen. Same character.
Free estimate from a local cabinet pro. No obligation.
Answered 24/7
Why Roswell Cabinet House
How to plan your project
Tell us about the room and a local cabinet pro gives you a free estimate, with no obligation to go ahead.
Free estimate from a local cabinet pro. No obligation.
Answered 24/7
Kitchen work in Roswell's country-club communities
Country-club communities like Horseshoe Bend, Willow Springs, Brookfield, and Martins Landing were built between the late 1970s and early 1990s with standardized cabinetry. Raised-panel oak doors on framed, particleboard boxes were the norm. These cabinets were designed for volume, not longevity. Over time, the particleboard absorbs moisture, the hinges loosen, and the doors no longer align with each other. Many homeowners here begin with refacing, replacing just the doors and drawer fronts while keeping the existing boxes in place. But when layouts are outdated, boxes are warped, or a seller needs to stage the kitchen for a competitive resale market, a full replacement becomes the smarter choice. Semi-custom shaker doors on plywood boxes give a clean look that suits the neighborhood's architecture and respects the home's original footprint. For resale preparation, updated cabinets are a standard pre-listing upgrade in these neighborhoods.
The historic district and its pre-1900 housing stock
Historic Roswell includes homes built before 1900, many of which retain original woodwork, moldings, and architectural details. While the rest of the home may be under preservation review, the kitchen is often the one space where modern updates are permitted. The challenge is matching the cabinet style to the home's era without creating visual conflict with the existing millwork. In these cases, inset cabinetry in stained white oak or rift-sawn walnut is frequently chosen to echo the craftsmanship of the period. Framed construction is preferred over frameless to maintain the traditional profile. Soft-close hinges and dovetail drawers improve function without altering appearance. Crown molding and light rail are specified to align with the room's existing trim profiles. The free estimate includes a review of local preservation guidelines to confirm the final layout and materials before any order is placed. Knowing which changes require Historic Preservation Commission approval and which fall within the kitchen's permitted scope is part of that planning conversation.

East Roswell: 1990s builder stock reaching replacement age
East Roswell's subdivisions, developed in the 1990s, have standardized builder-grade cabinets. These were often made with particleboard boxes, thermofoil or painted MDF doors, and basic hardware. After 25 to 30 years, the materials show wear: doors warp in humidity, drawer slides fail, and the finish chips or peels. Unlike country-club homes, these houses rarely have historic constraints, so the focus shifts to performance and value. Homeowners here commonly choose semi-custom lines with plywood boxes, full-overlay shaker doors, and soft-close hardware as a straight upgrade from what the builder installed. The most frequent project type is replacing the entire cabinet run to accommodate open-concept layouts, larger center islands, or integrated appliances. Removing the peninsula wall that once closed off the kitchen from the living area often requires base cabinet reconfiguration, and that scope is confirmed at the free estimate. The cost difference between keeping particleboard and upgrading to plywood becomes clear there, where moisture resistance and fastener retention are evaluated against the home's climate history.
Traditional and transitional styles in Roswell
The dominant cabinet styles in Roswell fall between traditional and transitional. Raised-panel oak, once the default, is now being replaced with clean-lined shaker doors in painted maple or stained white oak. Many homeowners want to preserve the warmth of wood but eliminate the visual clutter of ornate detailing. Frameless cabinets are rarely chosen in older Roswell homes; framed construction is preferred for its durability and traditional silhouette. Door styles are selected to complement the home's architecture: slab doors for modern infill homes, shaker for mid-century and country-club properties, and inset for historic districts. Hardware choices follow suit, with bar pulls for a streamlined look or cup pulls for a more traditional feel. The finish is often matte or satin to reduce glare and hide minor scratches from daily use. Wood species matter in Georgia's humid summers: walnut and hickory resist swelling better than pine, and painted MDF is stable in spaces where wood movement is a concern. These style decisions are practical responses to Roswell's climate and housing history, not passing trends.

Kitchen cabinet cost in Roswell
Kitchen cabinet cost in Roswell varies by the condition of the existing structure, the scope of the project, and the grade of cabinetry chosen. Refacing existing boxes with new doors and drawer fronts typically runs roughly $4,500 to $10,500 for a full kitchen, depending on the number of doors and the wood or finish selected. Semi-custom cabinets installed in a standard kitchen run roughly $150 to $700 per linear foot, with plywood boxes, soft-close hardware, and full-overlay shaker doors falling in the mid-range. Custom cabinetry, including inset doors, solid hardwood boxes, and specialty units like tall pantries or appliance garages, runs roughly $500 to $1,200 per linear foot. A full kitchen replacement across all grades can range from roughly $10,000 to $60,000 installed.
What moves the price within each grade includes the number of boxes, the door style (raised panel costs more than slab), the box material (plywood versus particleboard), drawer count versus door count (drawers are more expensive to build), and hardware upgrades. Tall pantry units, lazy Susans, trash pull-outs, and accent lighting add to the total. Demolition, disposal, wall repairs, and countertop integration are separate line items. These figures are estimates for cabinet work in Roswell, GA, subject to change, and the final price is the one in the estimate you approve.
Cabinet options
Cabinetry for every room in the house
Commercial Cabinets
Multifamily and Apartment Cabinet Packages
New Construction Builder Cabinet Packages
Wholesale Cabinets for Contractors and Builders
Custom Kitchen Cabinets
Inset Cabinetry
Custom Walk-In Closet Cabinetry
Wet Bar and Butler's Pantry Cabinets
Outdoor Kitchen Cabinets
Kitchen Cabinets
Semi-Custom Kitchen Cabinets
Bathroom Cabinets and Vanities
Kitchen Island Cabinets
Built-In Cabinets and Bookcases
Cabinet Refacing
Garage Cabinet Systems
Pantry Cabinets and Pull-Out Organizers
Laundry Room Cabinets
Mudroom Lockers and Built-Ins
In-Stock CabinetsFree estimate from a local cabinet pro. No obligation.
Answered 24/7
The process
From first call to installed cabinets
Four steps, and you make a decision at the end of each one before the next begins.
Call or send the form
Tell us about the room and what you want from it, and a local cabinet pro contacts you to talk it through.
Free estimate
A free estimate for the room, with door style, finish and hardware choices to weigh before you commit.
Decide, then order
Ask for every cabinet and the lead time to be listed in writing. Nothing is ordered until you decide to go ahead.
Delivery and install
Boxes are checked on arrival, set level and scribed to the walls, doors adjusted, then a walk-through with you.
Free estimate from a local cabinet pro. No obligation.
Answered 24/7
Service area
Areas covered by these guides
Questions
Questions Roswell homeowners ask
Is my quote for new doors fair, or should it be closer to new cabinets?
Doors-only work should cost noticeably less than a full replacement of the same kitchen. If a refacing quote sits near what new cabinets with new counters would cost, ask for the replacement number too and compare. Seeing both on one estimate is the quickest way to know.
Will refaced cabinets look cheap after a few years?
Badly done refacing can peel at the edges, and that is where the stories come from. Done with good materials on sound boxes, it can be hard to tell from new. Ask what the veneer is, how it is bonded and who comes back if an edge lifts.
How much of the job do we spend without a kitchen?
Doors and fronts change while the boxes, sink and counter stay put, which keeps the kitchen usable through most of the work. A full replacement is a longer stretch with the counters off. Ask the estimate for the number of days you will be without water at the sink.
Do I hear back once the form is in?
A local cabinet pro takes your project and contacts you about the free estimate. This page does not name a callback time. For a quicker conversation, call the number shown above.
Will they push me to sign before I have had time to think?
Nothing about the estimate obliges you, so any decision happens on your timeline. If a discount only exists when you sign tonight, it was never really a discount. Take the number and think.
Who measures for new doors, and who pays if they do not fit?
Ask before you order, and get the answer in writing. Doors are made to the openings, so an error in one measurement becomes a door that will not close. The name beside the measurements should be the name that remakes the door if it is wrong.
Is it worth waiting for cabinet prices to drop?
The numbers point the other way. US producer prices for wood kitchen cabinets rose about 5.4% in the year to September 2026, and the tariff on imported cabinets is scheduled to step from 25% to 50% on January 1, 2027. If the kitchen bothers you now, a free estimate costs nothing to get.
Do you reface cabinets or replace the whole box?
Both options are available. If the existing boxes are structurally sound, plumb, and free of water damage, refacing the doors and drawer fronts is a cost-effective update that typically runs roughly $4,500 to $10,500 for a full kitchen. If the boxes are warped, damaged, or the layout needs to change, a full replacement is the better path. The condition of the boxes decides which scope makes sense, so ask how it will be checked at the free estimate.
What is the difference between framed and frameless cabinets?
Framed cabinets have a face frame attached to the front of the box that the doors mount to; it adds a traditional look and structural rigidity. Frameless cabinets have no face frame, which allows full access to the interior and gives a more open, contemporary look. In Roswell's older homes, framed construction is the more common choice because it suits the architecture and holds up well in humid Georgia conditions.
Should I choose painted or stained cabinets?
Painted cabinets in maple or MDF are popular in country-club communities and newer builds for their clean, bright look and consistent color. Stained wood, such as white oak or walnut, suits historic district properties and homes with original woodwork because the grain reads as a natural continuation of the existing material palette. Both hold up well in Georgia's humidity when the box construction and finish quality are appropriate for the environment.
Your Roswell kitchen, a year from now
Shaker doors on solid boxes, a finish that does not chip at the handles, and a kitchen that looks new when friends come over.
The raised-panel oak stays, the hinges sag a little more, and every update you consider starts from a kitchen that keeps looking older.
Free estimate from a local cabinet pro. No obligation.
Answered 24/7
Get my free estimate
Or call (770) 790-5990. Calls only, we do not receive text messages.
Talk to us about your project
Tell us about the room, in Roswell or anywhere in the service area, and a local cabinet pro gives you a free estimate, with no obligation.
Free estimate from a local cabinet pro. No obligation.
Answered 24/7
Calls only, we do not receive text messages.
