Skip to content
Roswell Cabinet House

Kitchen Cabinets in Roswell, GA

Kitchen cabinets in Roswell from 1985 to 1995 used raised-panel oak on face-frame boxes. The boxes often still pass. The doors and hardware are the part that shows its age.

Get my free estimate >>

Free estimate from a local cabinet pro. No obligation.

Get my free estimate

Free estimate from a local cabinet pro. No obligation.

By submitting you agree to be contacted about your project.

Or call (770) 790-5990. Calls only, we do not receive text messages.

White shaker uppers over grey-blue base cabinets and island, matte black pulls, subway tile and a farmhouse sink.
Call (770) 790-5990

Answered 24/7

Most kitchens in Roswell were installed between 1985 and 1995, when raised-panel oak doors on face-frame boxes were standard builder spec. Replacing or refacing kitchen cabinets in Roswell, GA today means working with those existing conditions: the wall openings, the box depths, and the floor plan that was never designed for an island. Roswell Cabinet House evaluates the existing structure first, then walks through the three paths available so the scope matches the actual goal.

  • Free estimate from a local pro
  • No obligation to go ahead
  • Semi-custom to full custom

About our kitchen cabinets

The right starting spec for a home going to market in Horseshoe Bend or Willow Springs is different from the right spec for a long-term owner planning to stay for another decade. Call today to schedule a free estimate and get a price tied to a specific scope before anything is committed.

Kitchen cabinets in Roswell

Roswell kitchen cabinets that look new without replacing solid boxes

The face-frame boxes installed in Roswell kitchens between 1985 and 1995 were often built with solid wood frames and plywood sides. Many of those boxes are still square, level, and structurally sound. The raised-panel oak doors and the 1990s hardware are what make the kitchen look dated, and both can change without a full tear-out. The test is under the sink: soft or swollen material there means the box goes.

  • Sound boxes plus new shaker doors reads as a different kitchen. The layout stays, the look changes.
  • The test for box condition is under the sink, where water and humidity do the most damage first.
  • Never pay to replace boxes that pass the condition test just because the doors look old.
Get my free estimate >>

Free estimate from a local cabinet pro. No obligation.

Call (770) 790-5990

Answered 24/7

Kitchen cabinet update in Roswell neighborhoods

Shaker doors and soft-close hardware on Roswell's framed boxes

Swapping raised-panel oak doors for painted shaker and adding soft-close hinges and drawer glides changes the kitchen at the most visible level without disturbing the countertop, the backsplash, or the floor. When the granite or quartz on the counter still looks good, keeping it in place while changing the doors is the shorter project. Wall lengths decide the cabinet run, and the existing run does not need to change.

  • Soft-close hinges and drawer glides are the hardware upgrade that changes how the kitchen sounds and feels every day.
  • Keeping the countertop in place means no countertop template, no countertop wait, and no plumbing reconnect.
  • So the kitchen update skips the longest part of a full replacement.
Get my free estimate >>

Free estimate from a local cabinet pro. No obligation.

Call (770) 790-5990

Answered 24/7

Kitchen cabinet estimate in Roswell

A Roswell kitchen cabinet quote that tells you what drives the number

A kitchen cabinet quote should arrive as a line-item document, not a single total. The door style, the box material, the drawer box, the hardware, and the install each carry a cost, and each can be adjusted. A homeowner who sees the whole list can ask whether the particle-board shelf upgrade to plywood is worth the difference, and whether shaker MDF or shaker solid wood is the right choice for a painted finish.

  • Particle board versus plywood on the box interior is not a cosmetic choice. It affects how long the cabinet holds a load.
  • A painted finish on MDF holds color better than a painted finish on wood grain. The estimate should name which one is in the quote.
  • So you know which line to adjust if the estimate needs to come down.
Get my free estimate >>

Free estimate from a local cabinet pro. No obligation.

Call (770) 790-5990

Answered 24/7

Why Roswell Cabinet House

How to plan your project

Tell us about the room and a local cabinet pro gives you a free estimate, with no obligation to go ahead.

FreeAn estimate from a local cabinet pro, with no obligation
Line by lineAsk for every cabinet to be listed in the estimate, so changes stay simple
4 to 16 wksTypical lead time, semi-custom to custom; ask for yours at the estimate
LevelledBoxes shimmed, scribed and checked before the doors go on
Get my free estimate >>

Free estimate from a local cabinet pro. No obligation.

Call (770) 790-5990

Answered 24/7

The Roswell Housing Stock: What Most Kitchens Start With

Roswell grew rapidly through the 1980s, and the majority of the housing stock reflects that era. Face-frame construction with raised-panel oak doors was the standard for tract builders across the subdivisions that filled in during that decade. These kitchens came in with 12-inch wall cabinets, 24-inch base depths, and layouts designed for a galley or a U-shape rather than an open concept with an island.

The practical effect is that a kitchen renovation here almost always starts with an audit of the existing boxes. In most cases the face-frame boxes are structurally sound, which opens the choice between refacing, semi-custom on the existing footprint, or a full removal and new layout.

Refacing, Semi-Custom, or Full Custom: Which Path Fits

Refacing replaces the door and drawer fronts and the exposed box faces without touching the carcasses. It is the right call when the existing layout works, the box depths and heights match what the kitchen needs, and the boxes themselves are plumb and structurally sound. A full kitchen refacing runs roughly $4,500 to $10,500 as an estimate, depending on the number of doors and drawers, the door style, and the wood species or thermofoil selected.

Semi-custom is the middle path. The existing boxes come out, but the footprint stays close to what it was. The new boxes are ordered to a layout drawing and installed against the same walls. This is where most Roswell homeowners land: the existing kitchen worked, it just needs updated proportions, better storage and a door style that is not raised-panel oak.

Full custom means new boxes built to any spec: frameless or framed, inset doors or full overlay, a shaker profile in painted maple or stained white oak, rift-sawn oak or walnut for something more distinctive. The existing footprint does not constrain the layout. This path makes sense when the layout is changing significantly, when the ceiling height allows tall upper runs, or when the finish level of the rest of the home calls for cabinetry that semi-custom lines cannot supply. Lead time for custom work runs roughly 8 to 16 weeks from order placement to delivery.

White shaker kitchen with brass pulls, a pale grey island with two upholstered stools and two brass dome pendants.

Country-Club Communities: The Renovation Driving This Market

The highest concentration of kitchen renovation activity in Roswell runs through three corridors: Horseshoe Bend, Willow Springs and Brookfield. These are large-lot subdivisions built primarily in the 1980s, with homes ranging from 3,000 to 4,500 square feet, many of which have original kitchens that have not been touched since they were installed.

Two conditions drive the work. The first is a pre-sale renovation: an owner preparing to list wants a kitchen that reads as updated without over-improving for the neighborhood. For that project, a semi-custom replacement on the existing footprint with a full-overlay shaker door in a neutral painted finish and new hardware delivers the most visible change at the most controlled cost.

The second is a long-term owner who has deferred the renovation for decades and is finally doing it for the household. That project tolerates a longer lead time and a more deliberate finish selection: frameless construction, dovetail drawer boxes, undermount slides and a wood species chosen to last another 30 years.

Historic District Kitchens: Different Conditions, Different Spec

The older blocks near Canton Street and Roswell's original town center include homes that predate the 1980s subdivisions by decades. These kitchens present different conditions: narrower wall runs, lower ceilings, original plaster walls rather than drywall, and in some cases an HOA or historic review process that governs changes visible from the street.

For a kitchen in a historic property, the cabinet spec typically starts with a detailed field measure. Plaster walls are not uniform: a run that measures 96 inches in one spot may measure 94 or 97 inches at another. Scribing tolerances matter more than in a drywall kitchen, and door styles that cover more of the wall gap, such as a full-overlay door or an inset door built with a tight reveal, are often the better fit.

Inset cabinetry, where the door sits flush inside the face frame rather than overlapping it, is a traditional construction method that reads as period-appropriate in an older home. It requires more precise box construction and closer tolerances at install, which adds cost and lead time.

Sage green shaker cabinets with a tall pantry, stacked wall oven and microwave, nickel pulls and white quartz counters.

Kitchen Cabinet Cost in Roswell, GA

The cost of new kitchen cabinets in Roswell depends on which path the project takes. Refacing, where the existing boxes stay in place and only the door fronts, drawer fronts and visible box faces are replaced, runs roughly $4,500 to $10,500 as an estimate for a full kitchen. The primary variables are the number of doors and drawers, the door style and the material selected.

Semi-custom replacement, where the existing boxes come out and new boxes are installed to a layout drawing, runs roughly $150 to $700 per linear foot installed as an estimate. A kitchen with 25 to 30 linear feet of cabinet run typically falls in a range from roughly $15,000 to $35,000 installed, depending on the box construction, the door style, the finish and the interior fittings selected.

Custom cabinetry runs roughly $500 to $1,200 per linear foot installed as an estimate. A full custom kitchen can run from roughly $10,000 to $60,000 depending on the size of the run, the finish level and the scope of the work. A small kitchen with straightforward box sizes falls at the lower end; a large kitchen with specialty units, range hood cabinetry, a full pantry run and custom interior fittings falls at the upper end.

What moves the price within any grade: the door style (an inset door costs more to build than a full-overlay shaker because of the closer tolerances required), the box material (plywood construction holds fasteners better than particleboard in Georgia's humid summers), the number of drawers versus doors, and specialty units such as tall pantry boxes, range hood cabinets and appliance garages.

These figures are estimates for kitchen cabinets in Roswell, GA, subject to change, and the final price is the one in the estimate you approve.

The process

From first call to installed cabinets

Four steps, and you make a decision at the end of each one before the next begins.

  1. Call or send the form

    Tell us about the room and what you want from it, and a local cabinet pro contacts you to talk it through.

  2. Free estimate

    A free estimate for the room, with door style, finish and hardware choices to weigh before you commit.

  3. Decide, then order

    Ask for every cabinet and the lead time to be listed in writing. Nothing is ordered until you decide to go ahead.

  4. Delivery and install

    Boxes are checked on arrival, set level and scribed to the walls, doors adjusted, then a walk-through with you.

Get my free estimate >>

Free estimate from a local cabinet pro. No obligation.

Call (770) 790-5990

Answered 24/7

More cabinet options

Galley apartment kitchen with grey shaker cabinets, white quartz counters and subway tile, boxed cabinets stacked beyond the doorway.Corridor of a new apartment building with paper-covered floors and a white-cabinet kitchen visible through an open door.White raised-panel cabinets set on plywood subtops in a new house kitchen, with a drill and no countertops yet.

Questions

Kitchen Cabinets: Common Questions

Should I reface or replace my kitchen cabinets?

If the existing boxes are structurally sound, plumb and free of water damage, and the layout is not changing, refacing is worth evaluating. If the boxes are damaged, the layout is changing, or the existing box depths no longer match what the kitchen needs, a full replacement makes more sense. A field evaluation at the free estimate determines which scope is appropriate.

What is a realistic budget for kitchen cabinets in Roswell?

For semi-custom replacement on an existing footprint, roughly $150 to $700 per linear foot installed is an estimate for the cabinet portion. A 25 to 30 linear foot kitchen falls in a range from roughly $15,000 to $35,000 installed depending on the selections made. Custom work runs roughly $500 to $1,200 per linear foot as an estimate. Cabinet costs shift with selections and site conditions; the estimate you receive after the free estimate is what holds.

What door style works best in a 1980s Roswell home being updated for sale?

A full-overlay shaker door in a painted neutral is the most common replacement for raised-panel oak in homes from this period. It updates the kitchen without requiring a full custom specification or a significant change to the footprint. For owners who want more detail that reads as traditional, an inset door in a painted or stained finish adds depth that works well with the millwork profile common in homes built during that era.

How long does a semi-custom kitchen project take from first call to finished install?

From the initial visit through design, order placement, factory lead time and installation, a semi-custom project typically runs 6 to 10 weeks. Semi-custom lead times run roughly 4 to 8 weeks from order to delivery. Installation for a typical kitchen runs 2 to 4 days.

What is the difference between framed and frameless construction?

Framed construction attaches a solid wood frame to the front of the box. Frameless construction omits the frame and attaches the doors directly to the box sides, allowing a full-overlay door that covers more of the box face for a cleaner look. Framed construction is standard on most semi-custom lines and is the method used in the original builder-grade boxes found in 1980s Roswell homes.

Do you serve my neighborhood in Roswell?

Roswell Cabinet House serves Roswell and its surrounding service area in Fulton County. Call to confirm the current service schedule for your specific neighborhood and to book a free estimate.

What does the written warranty cover?

Ask for the written warranty terms before placing the order, so the coverage and duration are clear. Ask about the current written warranty terms at the free estimate before the order is placed.

Free estimate

Talk to us about kitchen cabinets

Tell us about the room, in Roswell or anywhere in the service area, and a local cabinet pro gives you a free estimate, with no obligation.

Get my free estimate >>

Free estimate from a local cabinet pro. No obligation.

Call (770) 790-5990

Answered 24/7

Calls only, we do not receive text messages.

Call (770) 790-5990