Multifamily Cabinet Packages in Roswell, GA
Use Roswell Cabinet House to ask about multifamily Cabinet Packages in Roswell, including available providers and the assessment needed for your room. Property managers and HOA boards at Roswell condominium communities face a predictable renovation cycle: builder-grade kitchens installed in the 1990s are aging out at roughly the same rate across entire buildings. Multifamily cabinet packages in Roswell, GA offer a structured way to address that. For multifamily Cabinet Packages in Roswell, ask the selected provider to confirm whether this work or service is offered and identify what is included in the written scope.
- Itemized written quotes
- Measured before ordering
- Semi-custom to full custom
Request a written quote
Or call (562) 203-3232. Calls only, we do not receive text messages.
About our multifamily and apartment cabinet packages
Ordering in bulk across 10 to 20 units at a time changes both the economics and the logistics of a renovation program. Confirm the Roswell supplier's for multifamily Cabinet Packages in Roswell current collection or delivery options, applicable charges, location and access arrangements before planning the job. Call to discuss scope, timeline, and a written quote for your association cabinet program.
Why Roswell Cabinet House
How We Work
One conversation in your home, one measure, one written quote, then an install date.
Martin Lakes Condos and Lakeview patio homes
Martin Lakes Condos and the Lakeview patio homes in Martins Landing represent the two largest concentrations of multifamily renovation opportunity inside Roswell. Martin Lakes has 170 units and Lakeview has 146 units, both communities built between the mid-1990s and early 2000s with standardized floor plans and original oak cabinetry that is now well past its useful life. The kitchens in these units are compact. Where a detached home in the same community typically has 18 to 30 linear feet of cabinetry, a condo or patio-home kitchen runs 8 to 12 linear feet of boxes. That difference shapes every decision in the package: door count, box sizing, corner treatment, and the balance between base and wall cabinets all read differently at this footprint than they do in a full single-family kitchen.
Because both communities share similar construction eras and similar floor plans, a package approved for one phase in Martin Lakes can be adapted for Lakeview with minimal modification. This cross-community consistency matters for associations managing renovation programs across both properties, or for investors holding units in both buildings. A single approved specification shortens the review cycle on each subsequent phase and holds material costs predictable across the full program.
Per-unit package specification
For multifamily cabinet packages in Roswell, compare the selected panel's stated exposure rating, edge sealing and fastening requirements before choosing a substrate. Painted shaker is the working standard for multifamily renovation programs in Roswell for three reasons: the finish is neutral enough to appeal across the widest range of buyers and renters, the shaker profile ages without looking dated, and a painted maple box tolerates Georgia humidity better than most stained wood species in a condo environment where climate control can be inconsistent between units.
The material choice for multifamily cabinet packages in Roswell should follow the manufacturer's published load and exposure limits for the actual installation. In this Roswell multifamily cabinet packages project, confirm moisture exposure, panel construction and support requirements against the selected product's installation guide. Dovetail drawer joinery and undermount slides are standard. Soft-close hinges are included on every door. Interior fittings are sized to what the unit footprint supports: a pull-out trash bin in one base cabinet, and a lazy Susan where a corner base is present. Crown molding, light rail, and toe kicks are included for visual consistency across units in the same building.
Glass door inserts and under-cabinet lighting are available as upgrades for owner-occupied units at the premium end. They are not part of the standard bulk association package. Keeping the base package consistent holds per-unit cost predictable and eliminates the scheduling complications that come when individual units carry different specifications and require different installation sequences.

Phased delivery for association renovation programs
A multifamily renovation program in Roswell typically runs in phases of 10 to 20 units. The phase size is set by the association calendar: units enter the program when they turn over or when the board opens a renovation window, and the cabinet package is delivered and installed within that window. Running too few units per phase raises the per-unit cost of delivery and crew mobilization. Running too many at once strains scheduling and can push installation behind unit vacancy, which delays the next occupant and creates carrying cost for the association.
A single point of contact is assigned to each association for the duration of a renovation program. That contact manages the production schedule, tracks each phase from order placement through delivery inspection, and coordinates with the property manager on delivery access, elevator scheduling, and debris removal. Orders are produced and shipped phase by phase rather than in a single large batch, so on-site storage is kept to one phase worth of boxes at a time. Each delivery is inspected before installation begins. Any damaged or mislabeled boxes are flagged for replacement before the crew starts so the unit does not sit open an extra day waiting on a missing part.
Lead time for each phase is confirmed with the factory before the order is placed. For multifamily Cabinet Packages in Roswell, confirm current product availability and the proposed delivery and installation sequence before committing to dates. That window is documented in writing so the property manager can commit to a renovation calendar with a confirmed date rather than an open range.
Package cost and scheduling for bulk orders
Per-unit cabinet cost for a multifamily renovation program in Roswell depends on the footprint, the specification, and the order volume. Compare the Roswell proposal for multifamily Cabinet Packages in Roswell by scope: retained components, new boxes, hardware, delivery, removal and any separate trade work should be identified before you judge the total. The grade of construction, the number of specialty units such as tall pantry boxes or range hood cabinets, and whether the layout changes from the original configuration all affect the final figure.
Ask how the quoted multifamily Cabinet Packages in Roswell option changes with cabinet construction, drawer count, specialty fittings and site preparation; confirm which materials and work are actually included. Bulk orders across a full renovation program qualify for volume pricing locked at the time of the initial agreement, which protects the association budget from mid-cycle material cost changes. For multifamily Cabinet Packages in Roswell, request an itemized quote showing box sizes, door and drawer choices, fittings, finish and installation scope rather than relying on a general price range. In most condo and patio-home kitchens from the 1990s, the original particleboard boxes are not a reliable substrate for new hardware after 25 to 30 years of use, which makes full replacement the more practical scope for Martins Landing units.
Delivery scheduling is coordinated against the association renovation calendar. Delivery windows are set to coincide with unit vacancy and demolition completion. The figures above are estimates for multifamily package in roswell, subject to change, and the written quote sets the final price.
The process
From first call to installed cabinets
Four steps, and you make a decision at the end of each one before the next begins.
Call or send the form
We call back, talk through the room and what you want from it, and set a time to visit.
Measure and design
A field measure, then a layout with door style, finish and hardware you can see before you commit.
Written quote and order
An itemized quote with the lead time on it. Cabinets are ordered against the measured drawing once you sign.
Delivery and install
Boxes are checked on arrival, set level and scribed to the walls, doors adjusted, then a walk-through with you.
More of What We Build



Service area
Where We Work
Questions
Multifamily and Apartment Cabinet Packages: Common Questions
Do you work with HOA boards directly or only through property management companies?
Both. Confirm who will handle the proposed Roswell work for multifamily Cabinet Packages in Roswell, which documents or samples can be provided and which responsibilities remain with the homeowner or another contractor. The approval process, documentation, and specification review are handled the same way regardless of who holds the contract.
Can you provide material samples for HOA architectural review?
Yes. Ask whether the supplier can provide door samples, finish swatches, hardware samples, and a written specification sheet formatted for architectural committee review. For the Roswell multifamily project, ask who can supply the association’s required documents and who will submit them or attend any review meeting.
What door style works best for rental units in a Roswell condo?
Painted shaker in white or off-white is the standard for condo and patio-home renovation programs in Roswell. The finish is neutral for resale and rental turnover, durable in high-traffic environments, and consistent across units so that future phases match completed ones. Slab doors cost less but show wear more quickly. Raised panel or inset doors add cost without improving durability in a rental context.
Is refacing an option for condo units, or does the scope usually require full replacement?
Refacing is available where the existing boxes are structurally sound, plumb, and free of water damage. In most condo and patio-home kitchens built in the 1990s, the original particleboard boxes are not a reliable substrate for new hardware after 25 to 30 years of use, and full replacement produces a better long-term result. The site visit evaluates the existing boxes and confirms which scope makes sense before an order is placed.
What is the lead time for a phased bulk order?
Request a scope-based schedule for multifamily Cabinet Packages in Roswell, including countertop work, service connections and any return visits rather than assuming a standard duration. Custom wood species or inset door styles extend that to eight to ten weeks. Lead time is confirmed with the factory before the order is placed and provided in writing so the association renovation calendar is based on a confirmed date, not an open estimate.
How do you ensure each phase matches previous ones in finish and hardware?
Every phase is built from the same approved design file. Finish, box dimensions, hardware, and accessories are drawn from the same specification used in the first phase. Boxes are labeled by unit number before leaving the factory. An installation checklist is completed for each unit before the crew leaves, covering door alignment, drawer function, and finish quality.
Does the cabinet package include countertop integration?
The package is designed with precise countertop edge profiles and cutout dimensions for sinks and cooktops. Those dimensions are provided to the countertop fabricator so the template can be taken the day after installation. Countertop supply and installation is handled separately, but the cabinet installation is completed level and plumb so the template can proceed without delay.
Is there a written warranty on multifamily packages?
Ask whether a written warranty applies to multifamily cabinet packages in Roswell, and request its coverage and exclusions before ordering. Ask for the current written warranty terms at the time of quote approval.
Talk to us about multifamily and apartment cabinet packages
Tell us about the room, in Roswell or anywhere in the service area, and we call back to set up a visit.
Calls only, we do not receive text messages.
