Cabinet Refacing in Roswell, GA
Cabinet refacing in Roswell is the right call for a listing date in 60 to 90 days and a kitchen of raised-panel oak boxes that are still square and solid.
Free estimate from a local cabinet pro. No obligation.
Get my free estimate
Or call (770) 790-5990. Calls only, we do not receive text messages.

Answered 24/7
If you have a listing date within the next 60 to 90 days and a kitchen full of raised panel oak doors from the 1980s, cabinet refacing in Roswell, GA is often the fastest way to move that kitchen to the look current buyers expect. Roswell Cabinet House evaluates the existing boxes, replaces the door and drawer fronts, and refinishes the exposed face frames so the result reads as a renovation without requiring a full gut.
- Free estimate from a local pro
- No obligation to go ahead
- Semi-custom to full custom
About our cabinet refacing
The decision between refacing and a full replacement comes down to what the existing boxes are doing. If the plywood or particleboard boxes are level, dry and structurally sound, they can carry new doors and drawer fronts for another decade. If they have shifted off plumb, swelled from moisture or no longer align correctly, a full replacement is the better scope. Call to schedule a free estimate that separates the two paths clearly.
Cabinet refacing in Roswell
Refaced Roswell cabinets ready before a listing date
A seller with a listing date on the calendar needs a kitchen update that does not stretch into a full replacement calendar. Cabinet refacing replaces the doors, drawer fronts, and visible surfaces while the boxes stay in place. The countertop and plumbing do not move, which removes the trades that extend a full replacement into weeks. Roswell buyers at the upper price levels expect a kitchen that photographs clean, and refacing delivers that without the full replacement calendar.
- Doors and fronts change in days. A full box replacement takes weeks plus the countertop and plumbing trades.
- Keeping the countertop in place removes the countertop template wait from the schedule.
- So the kitchen is ready for listing photos before the project adds weeks to a tight timeline.
Free estimate from a local cabinet pro. No obligation.
Answered 24/7
Reface or replace Roswell cabinets
Refacing pays when the Roswell boxes pass the condition test
Refacing only makes sense when the existing cabinet boxes are square, the shelves are solid, and there is no water damage at the sink base. The test for box condition is the sink base cabinet: open the door and press the interior wall. Soft or spongy material means the box has absorbed water and the replacement cost now goes into a box that will fail again. Sound boxes plus new doors is a different project from damaged boxes plus new doors.
- Soft material under the sink means the box goes, not the doors.
- A box that passes the condition test can carry new doors for another decade.
- So refacing is the right scope when the boxes earn it, not as a default alternative to replacement.
Free estimate from a local cabinet pro. No obligation.
Answered 24/7
Cabinet refacing quote in Roswell
A refacing quote that names the veneer, the method, and what it excludes
Refacing quotes range widely because the veneer material, the application method, and whether the interior is cleaned and lined are each separate costs. A veneer pressed to a prepared surface holds better than one applied with contact cement to an unprepped surface. Ask the written quote to name the veneer material and how it is applied. What is not in the quote is as important: box interiors, drawer boxes, and hardware are often line items the homeowner expects but the quote excludes.
- Pressed veneer over a prepared surface outlasts contact cement on an unprepped one. Ask which method is in the quote.
- Drawer boxes and hardware are the line items most often missing from a refacing quote that looks complete.
- Ask about any exclusions at the free estimate before signing, so the total holds from start to finish.
Free estimate from a local cabinet pro. No obligation.
Answered 24/7
Why Roswell Cabinet House
How to plan your project
Tell us about the room and a local cabinet pro gives you a free estimate, with no obligation to go ahead.
Free estimate from a local cabinet pro. No obligation.
Answered 24/7
Refacing for resale: what it changes and what it does not
A refacing project replaces what a buyer notices first: the door fronts, the drawer fronts, and the finish on the face frames and exposed box ends. The box structure, the plumbing supply lines running through the base cabinets, and the wall-mounted uppers all stay in place.
For a Horseshoe Bend or Brookfield home built between 1983 and 1992, the original doors are typically a builder-grade raised-panel oak profile with a honey or golden stain. That look dates the kitchen immediately in the current resale market. Replacing those doors and drawer fronts with a painted shaker profile, and refinishing the face frames to match, converts the kitchen to a transitional style that Roswell resale buyers currently respond to, without touching the layout or the countertop.
What refacing does not change: the cabinet layout, the interior fittings already in the boxes, or the countertop height. If the layout is the problem, a full replacement is the right scope. If the kitchen needs additional storage runs or a different workflow, that is beyond what refacing can address. The evaluation visit determines which condition applies before any work is quoted.
The 10-to-14-day timeline and why it matters for listings
A refacing project in a Roswell kitchen moves in two distinct phases. The first is the free estimate and the door order: doors and drawer fronts are manufactured to the measured dimensions, which typically takes seven to ten business days from order placement to delivery. The second phase is the installation itself, removing the old door fronts and drawer fronts, preparing the face frames, applying the new finish, and hanging the new doors.
The full sequence from an initial evaluation to a finished kitchen typically runs ten to fourteen days. That window fits cleanly between a listing appointment and the professional photography session that precedes a home's first active showing. A pre-listing refacing that finishes before the photographer arrives means the marketing photos show the updated kitchen, not the original builder-grade one.
Scheduling around a photography date is the most common driver for refacing inquiries in this market. A seller who books the evaluation and approves the written quote in the same week can realistically plan for the doors to be in place before the listing photos are taken, even with a 60-day listing target. That window is simply not available with a semi-custom replacement, which carries a four-to-eight-week factory lead time before installation begins.

Standardized widths in Roswell subdivision homes
Roswell's large residential neighborhoods that developed between 1985 and 1995 were built in phases on a limited set of builder floor plans. Communities such as Bristol Oaks and the later sections of Horseshoe Bend share construction practices common to volume-built subdivisions: cabinet openings were framed to standard widths, and the original cabinet packages were ordered to match those openings. The base and upper cabinet widths in most of those kitchens fall on the standard 3-inch industry increments used by nearly every cabinet manufacturer.
When doors are ordered for a kitchen whose boxes are already sized to those standard dimensions, a significant portion of the order lands on stock door sizes rather than custom-cut pieces. A stock door is priced and delivered faster than a door cut to a fractional dimension. The estimator can set a firm per-door price before the order is placed, rather than a variable allowance that adjusts for non-standard cuts.
That predictability is one reason pre-sale refacing in Roswell's 1985-to-1995 subdivisions can be quoted more precisely than the same project in an older neighborhood with non-standard framing or in a kitchen that has been substantially remodeled since its original construction.
When refacing is the right scope and when it is not
Refacing is the right scope when the boxes are structurally sound and the layout stays the same. The conditions that confirm a refacing project: plywood or particleboard boxes that are plumb and level, face frames with no water-stain swelling or delamination, drawer glides that function or can be upgraded in place, and a countertop that is either being kept or replaced as a separate scope. When all four conditions hold, refacing delivers the visual change at roughly a third of the cost of a full replacement.
The conditions that push a project into full replacement territory: structural damage to the boxes from moisture or settling, a layout change such as removing a peninsula or adding an island, a ceiling height change that requires taller upper cabinets, or plumbing and electrical that needs to move from its current position inside the existing boxes. Any one of these makes full replacement the only viable path because a refacing project cannot reposition a box.
The evaluation visit settles the scope question. The evaluator checks the base cabinet corners for water staining, presses on the box floors for soft spots, and runs the drawer boxes to confirm the existing glides are sound. That inspection, not the estimate, is where the scope is determined.

Cabinet refacing cost in Roswell
Cabinet refacing cost in Roswell depends on the number of door fronts and drawer fronts, the door style selected, the material, and whether the face frames are being painted or wrapped in matching veneer. For a typical Roswell kitchen from the 1985-to-1995 build era, a complete refacing project runs roughly $4,500 to $10,500 as an estimate. A smaller kitchen with 10 to 14 door fronts runs toward the lower end; a larger kitchen with a full upper run, multiple drawer banks, and pantry doors runs toward the upper end.
Within that range, the choices that move the price are door style (a flat slab front costs less to fabricate than a shaker profile, and a shaker costs less than a carved raised-panel replacement), material (thermofoil is the most economical, painted maple is mid-range, and a solid wood veneer runs higher), and hardware. Replacing knobs and pulls at the same time as the door installation is the efficient sequence; scheduling them separately carries an additional service visit.
The per-door pricing model means a written estimate can itemize every opening before the order is placed, covering door fronts, drawer fronts, face-frame treatment, and hardware separately. These figures are estimates for cabinet refacing in Roswell, GA, subject to change, and the written quote you agree sets the final price.
The same kitchen, refaced

BeforeAfterThe process
From first call to installed cabinets
Four steps, and you make a decision at the end of each one before the next begins.
Call or send the form
Tell us about the room and what you want from it, and a local cabinet pro contacts you to talk it through.
Free estimate
A free estimate for the room, with door style, finish and hardware choices to weigh before you commit.
Decide, then order
Ask for every cabinet and the lead time to be listed in writing. Nothing is ordered until you decide to go ahead.
Delivery and install
Boxes are checked on arrival, set level and scribed to the walls, doors adjusted, then a walk-through with you.
Free estimate from a local cabinet pro. No obligation.
Answered 24/7
Also from us
Related Services
Kitchen Cabinets
In-Stock Cabinets
Laundry Room Cabinets
Mudroom Lockers and Built-Ins
Custom Kitchen Cabinets
Inset CabinetryFree estimate from a local cabinet pro. No obligation.
Answered 24/7
More cabinet options



Service area
Areas covered by these guides
Questions
Cabinet Refacing: Common Questions
Does cabinet refacing require a permit in Fulton County?
Cabinet refacing replaces door fronts and drawer fronts on existing boxes without moving plumbing or electrical. Whether a permit is required depends on the specific scope and the jurisdiction. Check with the city of Roswell or the Fulton County building department before work starts to confirm what applies to your project. Any scope expansion that adds new cabinet runs or repositions boxes changes the question.
How does a painted shaker door hold up in a Georgia kitchen?
A painted finish on a maple door requires a proper primer and a durable topcoat to handle the humidity swings common in Georgia kitchens. When specified and applied correctly, a painted maple shaker door is durable and straightforward to clean. The original stained oak doors on 1985-to-1995 builder cabinets were often applied over a particleboard substrate; a painted solid maple replacement is generally a material step up from what it replaces.
Can I reface and also replace the countertop at the same time?
Yes, and for a pre-listing project the sequence matters. The refacing installation does not depend on the countertop, so the two projects can be scheduled together. If the countertop is also being replaced, the countertop template is taken after the refacing is complete, since the top rests on the base cabinets and the measurement reflects the finished face-frame depth. Coordinating both scopes in a single evaluation visit is the most efficient path.
What is the difference between refacing and painting the existing cabinet doors?
Refacing replaces the door fronts and drawer fronts entirely with new fabricated pieces and resurfaces the face frames with new veneer or paint. Painting sands and applies finish to the existing doors without replacing them. Refacing allows a profile change, such as switching from a raised panel to a shaker, which painting cannot accomplish. Refacing also addresses drawer boxes and glides at the same time; painting does not touch the interior of the boxes.
How do I know if my boxes are solid enough to reface?
The evaluation visit checks this directly. The evaluator opens every door, presses on the box floors and walls to check for soft spots from moisture, inspects the face frames for gaps or delamination, and runs the drawer boxes to assess the existing glides. A box that has shifted off plumb beyond the shim tolerance, or that shows active moisture damage, is flagged as a replacement candidate. An estimate covers only the scope the boxes can support.
What should the written quote for a refacing project include?
Ask that the written quote itemize every opening by door count and drawer count, state the door style and material selected, describe the face-frame treatment, and list the hardware allowance if hardware is included. It also states the project start date, the completion window, and the written warranty terms. Any opening the evaluator flagged as a replacement candidate is listed separately with a note on the reason.
Does refacing cover the interior of the cabinet boxes?
Standard refacing covers the exterior surfaces: door fronts, drawer fronts, face frames, and exposed box ends. The interior shelves are not refinished as part of a standard refacing scope. Drawer box upgrades, such as switching from a side-mounted slide to an undermount soft-close slide, can be added at the time of the project if the drawer box dimensions are compatible. Confirm what is included in the written quote before the order is placed.
Talk to us about cabinet refacing
Tell us about the room, in Roswell or anywhere in the service area, and a local cabinet pro gives you a free estimate, with no obligation.
Free estimate from a local cabinet pro. No obligation.
Answered 24/7
Calls only, we do not receive text messages.
