In-Stock Cabinets in Roswell, GA
In-stock cabinets in Roswell are the right call for a rental kitchen that needs to be ready before the next tenant, not after an eight-week semi-custom lead time.
Free estimate from a local cabinet pro. No obligation.
Get my free estimate
Or call (770) 790-5990. Calls only, we do not receive text messages.

Answered 24/7
A Roswell landlord with a vacant rental kitchen does not have eight weeks to wait for a semi-custom order. In-stock cabinets in Roswell, GA give East Roswell investors and homeowners managing a secondary kitchen the fastest path from bare walls to a functional space. Roswell Cabinet House carries all-white shaker boxes that ship within three to five business days, so a kitchen can be measured, ordered and installed before the next tenant moves in.
- Free estimate from a local pro
- No obligation to go ahead
- Semi-custom to full custom
About our in-stock cabinets
The dimensional trade-off with in-stock boxes is worth knowing before the order is placed. These boxes come in fixed widths at three-inch increments, so a 1980s Roswell kitchen with irregular wall sections will likely need a filler strip to close a gap at the corner or against the wall. That is a manageable detail for a rental kitchen, not a disqualifier. Call Roswell Cabinet House to review the specific layout and get a free estimate before the order goes in.
In-stock cabinets in Roswell
In-stock cabinets for East Roswell without the eight-week order wait
A rental kitchen that is vacant is costing rent rather than collecting it. In-stock cabinets are on the shelf, not in a fabrication queue. A landlord with a standard kitchen layout can have a complete in-stock cabinet set installed in a week from the estimate conversation. The constraint is layout: standard cabinet widths need to cover the wall run without large gaps, which is the case in most of the colonial and split-level floor plans in East Roswell.
- Off-the-shelf means the cabinets are available today, not in eight weeks.
- Standard colonial and split-level floor plans in East Roswell typically match in-stock width options without large fillers.
- So the rental unit is back on the market before the second month of vacancy.
Free estimate from a local cabinet pro. No obligation.
Answered 24/7
In-stock cabinet grade for rentals in Roswell
In-stock cabinets that hold up to tenant use without a custom price
In-stock cabinet lines vary in box construction. A particle-board box with a thermofoil door is the lower end; a plywood box with a door that can be repainted is at the upper end. For a rental property in East Roswell, a plywood box holds up better over multiple tenants and survives the water exposure under the sink. The door style matters less in a rental than the box material, because the box is what a tenant damages and what a landlord replaces over time.
- Plywood box construction outlasts particle board in a rental, particularly under the sink where water runs.
- In-stock doors can be repainted between tenants. The box is what determines the replacement cycle.
- So the in-stock cabinet earns its cost over multiple tenant turns rather than one.
Free estimate from a local cabinet pro. No obligation.
Answered 24/7
In-stock cabinet quote for Roswell rental properties
An in-stock quote that covers removal, install, and the hardware
An in-stock cabinet quote for a rental property should cover the cabinet cost, the removal and haul-away of the existing cabinets, the install, and the hardware. Those four items are the ones that surprise landlords who compare an in-stock cabinet price to the full project cost. A cabinet-only quote is easy to find; a complete quote that includes removal and install is the number that decides whether the project pencils.
- Removal and haul-away are the costs that most cabinet-only quotes leave out.
- Hardware is a separate line in an in-stock quote. Basic hardware versus soft-close hardware is a cost decision, not a default.
- So the quote total is the actual project cost before the work starts.
Free estimate from a local cabinet pro. No obligation.
Answered 24/7
Why Roswell Cabinet House
How to plan your project
Tell us about the room and a local cabinet pro gives you a free estimate, with no obligation to go ahead.
Free estimate from a local cabinet pro. No obligation.
Answered 24/7
In-stock for rental properties and quick turnarounds
The most common in-stock cabinet order in Roswell covers a rental property in East Roswell or a basement conversion that needs a secondary kitchen. These are vacant rental units or accessory spaces where speed and predictable cost matter more than custom widths or a particular finish.
A typical order runs 10 to 15 linear feet: a base run, a wall cabinet run above it, and sometimes a tall pantry unit if the footprint allows. East Roswell's rental stock includes a lot of 1980s and early 1990s ranch and split-level homes where the kitchen is a compact galley or L-shaped layout. The landlord needs a functional, neutral finish that holds up to tenant turnover and photographs well for a listing. All-white shaker fills that role without requiring a design consultation that extends the schedule.
In-stock boxes work equally well for a basement kitchen where the goal is a rentable accessory dwelling or an in-law suite. The 10 to 15 linear foot range covers most basement footprints, and an all-white shaker profile reads as finished the day installation is done.
Ship time and installation timeline
The 3- to 5-day ship window from order date to delivery is the defining characteristic of in-stock cabinets. For a Roswell landlord, that window is the difference between a two-week kitchen turnover and a project that runs five to nine weeks from first appointment to installation complete on a semi-custom line. A two-week total project from the initial measure through installation complete is realistic with in-stock cabinets when the walls are clear, the plumbing rough-in is in place, and there is no layout change that requires moving a drain.
The sequence runs: measure and order on one visit, delivery and inspection when the boxes arrive three to five business days later, then a one- to two-day installation for a 10 to 15 linear foot kitchen with no complex corner units. The day after the new boxes are set and leveled, a countertop template can be scheduled, adding one to two weeks before the room is fully functional. The space is usable as a kitchen the day installation finishes.
Scheduling the measure during the final week of an existing tenancy means boxes arrive the following week and installation can begin as soon as the unit is vacant. That sequencing keeps the vacancy window as short as possible.

Where in-stock widths fit and where they do not
In-stock cabinet lines are manufactured in fixed widths at three-inch increments: 9, 12, 15, 18, 21, 24, 27, 30 and 33 inches for most base and wall units. That roster covers the majority of layouts cleanly. The difficulty comes at the end of a run, at a corner, or against a wall where no available increment lands on the actual wall dimension.
In a Roswell home built in the 1980s, wall sections are rarely exact multiples of three inches. The final base or wall cabinet in a run will land short of the wall by some remainder, and a filler strip closes that gap. Filler strips are a standard part of any in-stock installation: cut from a matching panel and scribed to the wall surface, they leave the finished run looking correct. A semi-custom order would fill the same gap with a box built to the exact remaining width, but for a rental property the filler strip approach works equally well and does not require a four-to-eight week factory lead time.
Corner configurations require more attention. A blind-corner base leaves a dead zone whose depth varies with the actual wall angle. For a basement kitchen with a simple galley or single-wall layout and no inside corners, this is not a factor. A layout review before the order is placed confirms where fillers will land and how corners are handled.
All-white shaker: the standard in-stock spec for Roswell
All-white shaker cabinets are the dominant in-stock specification for the Roswell rental market because they photograph clearly for listings and work with any countertop surface a tenant or subsequent owner may choose. A shaker door profile, with its recessed center panel and square frame, reads as current without being tied to a specific design era.
The typical in-stock box carries a thermofoil or painted finish on a medium-density fiberboard door, which holds up well in a rental kitchen that sees regular cleaning and tenant changeover. Soft-close hinges are increasingly standard on in-stock lines, though the specification varies by supplier and is confirmed at the time of order. Box construction on most in-stock lines is a particleboard interior shell with a plywood floor, which is adequate for a rental kitchen with proper ventilation and no history of moisture intrusion.
For a primary occupied kitchen, specifying plywood box construction throughout is the better long-term choice given Georgia's humid summers and the added load on drawer bottoms. For a rental property in sound condition, the standard in-stock construction handles normal use. That call is worth a conversation at the free estimate based on what the specific space shows.

In-stock cabinet cost in Roswell
In-stock cabinets sit at the low end of the cabinet grade ladder because the box is manufactured to standard dimensions without a factory customization step. For an in-stock order, the grade means the door style is fixed by the manufacturer, typically a white shaker profile, the box construction is set rather than specified, and the finish selection is limited to what is currently in stock rather than the full palette available on semi-custom lines.
The factors that move the price within an in-stock order: the number of boxes and their widths, whether the run includes a tall pantry unit or a specialty base such as a sink base or a corner blind unit, hardware selection, soft-close specification, filler strip material, and demolition and disposal of the existing cabinets if they are in place. Countertop work after installation is a separate scope item.
For reference across all grades, semi-custom kitchens run roughly $150 to $700 per linear foot installed, and custom work runs roughly $500 to $1,200 per linear foot. A full kitchen replacement across all three grades can run from roughly $10,000 to $60,000 installed. Refacing, where the existing boxes are structurally sound, runs roughly $4,500 to $10,500 for a complete kitchen. All figures above are estimates for in-stock cabinets in Roswell, GA, subject to change, and the final price is the one in the estimate you approve.
The process
From first call to installed cabinets
Four steps, and you make a decision at the end of each one before the next begins.
Call or send the form
Tell us about the room and what you want from it, and a local cabinet pro contacts you to talk it through.
Free estimate
A free estimate for the room, with door style, finish and hardware choices to weigh before you commit.
Decide, then order
Ask for every cabinet and the lead time to be listed in writing. Nothing is ordered until you decide to go ahead.
Delivery and install
Boxes are checked on arrival, set level and scribed to the walls, doors adjusted, then a walk-through with you.
Free estimate from a local cabinet pro. No obligation.
Answered 24/7
Also from us
Related Services
Semi-Custom Kitchen Cabinets
Cabinet Refacing
Pantry Cabinets and Pull-Out Organizers
Laundry Room Cabinets
Mudroom Lockers and Built-Ins
Custom Kitchen CabinetsFree estimate from a local cabinet pro. No obligation.
Answered 24/7
More cabinet options



Service area
Areas covered by these guides
Questions
In-Stock Cabinets: Common Questions
Is in-stock the right grade for a rental property kitchen in East Roswell?
For a rental kitchen where speed and predictable cost matter more than custom sizing or a specific finish, in-stock is typically the right choice. The 3- to 5-day ship window allows a Roswell landlord to complete a kitchen turnover in under two weeks from order date. For a primary occupied kitchen where the homeowner wants exact widths throughout a long run or a custom painted color, semi-custom or custom is a better fit.
Can in-stock cabinets fit a 1980s Roswell kitchen with non-standard dimensions?
Yes, with filler strips. In-stock boxes come in three-inch width increments, so the last box in any run will often fall short of the wall by some remainder. A filler strip cut from matching panel material closes that gap and is scribed to the actual wall surface. It is a standard part of any in-stock installation and does not affect the finished function or appearance of the run.
How quickly can a Roswell rental kitchen turn around using in-stock cabinets?
From measure to installation complete, a 10 to 15 linear foot in-stock kitchen runs roughly one to two weeks: measure and order on one visit, 3 to 5 business days for boxes to ship and arrive, a delivery inspection, then a one- to two-day installation. Countertop templating and fabrication adds one to two weeks before the room is fully functional, but the kitchen is usable the day the cabinets are installed and leveled.
What should the written quote for an in-stock order include?
Ask that the written quote itemize every box by width and type: base cabinets, wall cabinets and any tall units in the layout. Hardware, soft-close specification and filler strip material are listed separately. Demolition of the existing cabinets, if needed, and countertop work after installation are called out as separate line items so the full scope is clear before the order is placed.
When does in-stock not make sense?
If the kitchen requires exact custom widths throughout a run with multiple inside corners, if the project involves an open-concept island conversion that changes the wall footprint, or if the homeowner wants a specific wood species or a custom paint color, a semi-custom line is the better fit. The four-to-eight week lead time for semi-custom is the trade-off against wider specifications and built-to-dimension sizing.
Does Roswell Cabinet House serve East Roswell and nearby addresses in Fulton County?
Roswell Cabinet House serves Roswell and surrounding service areas in Fulton County. Call to confirm the current service schedule for a specific address, including East Roswell neighborhoods and nearby suburbs.
Does an in-stock order come with a written warranty?
Ask for the written warranty terms before the order is placed. Ask at the free estimate for the current written warranty terms before the order is placed.
Talk to us about in-stock cabinets
Tell us about the room, in Roswell or anywhere in the service area, and a local cabinet pro gives you a free estimate, with no obligation.
Free estimate from a local cabinet pro. No obligation.
Answered 24/7
Calls only, we do not receive text messages.
