Skip to content
Roswell Cabinet House

Cabinets in Martins Landing, GA

Cabinets in Martins Landing suit the compact Lakeview patio home kitchen as much as the larger lakefront floor plans, and the right scope depends on which condition the existing boxes are in.

Get my free estimate >>

Free estimate from a local cabinet pro. No obligation.

Get my free estimate

Free estimate from a local cabinet pro. No obligation.

By submitting you agree to be contacted about your project.

Or call (770) 790-5990. Calls only, we do not receive text messages.

[ALT PENDING: look at the martins-landing picture, then describe what it shows]
Call (770) 790-5990

Answered 24/7

When deciding between refacing and a full replacement for cabinets in Martins Landing, GA, the answer often turns on which part of the community you live in. A patio home in Lakeview, a unit at Martin Lakes Condos, and a detached colonial in the later sections each carry a different kitchen size and a different original spec. Roswell Cabinet House scopes each project from the actual housing type and footprint, not from a standard template.

  • Free estimate from a local pro
  • No obligation to go ahead
  • Semi-custom to full custom

Historic Roswell · Willow Springs · Brookfield · Horseshoe Bend

Cabinet work in Martins Landing

The community spans 12 distinct neighborhoods built from the early 1970s through the early 1980s, with the North Shore section along the Chattahoochee River holding the oldest and most compact kitchens. A project here starts with identifying which section the home is in, then matching the right scope: refacing where the boxes are still sound, a semi-custom order where the layout holds, or a custom plan where non-standard wall dimensions call for a different approach.

Cabinets in Martins Landing

Martins Landing cabinets matched to the compact patio-home kitchen

The Lakeview patio homes in Martins Landing have kitchens that are smaller than the lakefront homes in the same community. A semi-custom order built around the actual wall dimensions of a compact galley or L-shaped layout fills the run without the gaps that a catalog order leaves. Compact kitchens have less room for error on the cabinet width: a filler strip in a small kitchen is more visible than the same strip in a large one.

  • Compact kitchen dimensions need more precision on the cabinet width than a large kitchen does.
  • A filler strip is more visible in a small kitchen. Semi-custom widths close the gap that in-stock leaves.
  • So the cabinet run fills the wall in the kitchen that exists, not in the standard-sized one.
Get my free estimate >>

Free estimate from a local cabinet pro. No obligation.

Call (770) 790-5990

Answered 24/7

Reface or replace cabinets in Martins Landing

Reface or replace: the question Martins Landing patio-home owners ask first

Compact kitchens in Martins Landing patio homes are among the best candidates for refacing when the boxes are sound: less wall to cover means a shorter project, fewer doors to replace, and less countertop edge to work around. The layout question is the one that tips the decision: if the owner wants to move a cabinet run or open the kitchen into another space, that is a replacement project regardless of box condition.

  • Less wall to cover in a compact kitchen means refacing finishes faster than in a full-size kitchen.
  • Moving a wall or a cabinet run is a replacement project. Box condition is not the deciding factor.
  • So the scope follows the actual goal: update the look, or change the layout.
Get my free estimate >>

Free estimate from a local cabinet pro. No obligation.

Call (770) 790-5990

Answered 24/7

Cabinet estimate in Martins Landing

A Martins Landing cabinet quote that names what stays and what is replaced

A cabinet estimate for a patio home in Martins Landing should state clearly what is being replaced, what is staying, and what the boundary conditions are: whether the countertop is in scope, whether the appliances move, and whether the upper cabinets are included. A quote that covers only part of the scope and assumes the homeowner will manage the rest leads to a project that stops in the middle when the other trades have not been arranged.

  • A quote that covers the lower cabinets and excludes the uppers is half a project. Ask if the scope is the full kitchen.
  • Appliance positions are the boundaries that set the cabinet run. A quote should name them.
  • So the estimate covers the full scope before any trade coordination starts.
Get my free estimate >>

Free estimate from a local cabinet pro. No obligation.

Call (770) 790-5990

Answered 24/7

Why Roswell Cabinet House

How to plan your project

Tell us about the room and a local cabinet pro gives you a free estimate, with no obligation to go ahead.

FreeAn estimate from a local cabinet pro, with no obligation
Line by lineAsk for every cabinet to be listed in the estimate, so changes stay simple
4 to 16 wksTypical lead time, semi-custom to custom; ask for yours at the estimate
LevelledBoxes shimmed, scribed and checked before the doors go on
Get my free estimate >>

Free estimate from a local cabinet pro. No obligation.

Call (770) 790-5990

Answered 24/7

Patio homes, condos, and single-family: three different scopes

Martins Landing holds 1,965 homes across 12 distinct sub-neighborhoods on 1,030 acres, and the range of housing types means cabinet project scopes vary more widely here than in a community built to a single product type. The Lakeview section contains 146 zero-lot-line patio homes, Martin Lakes Condos accounts for 170 units, and the balance consists of detached colonials, split-levels, and ranches built through the late 1970s and early 1980s.

A patio home in Lakeview typically carries a galley or compact kitchen in the 8 to 12 linear foot range. The box count is lower than a colonial kitchen, which keeps the scope contained, but the smaller footprint also leaves less room for layout changes. Where the existing boxes are structurally sound and the layout works for the household, refacing updates the look without touching walls or plumbing.

A detached colonial in the later Martins Landing sections more often presents a kitchen of 15 to 22 linear feet across base and wall runs. These homes are strong candidates for a full semi-custom replacement on standard 3-inch increments, because the floor plans were built to accept modern cabinet sizing without custom-width pieces at every run end.

Martin's Landing Foundation review: what it covers

The Martin's Landing Foundation is a non-profit organization with mandatory all-owner membership across the entire community. Its review process applies to exterior structural changes: additions, alterations to the building envelope, fences, and site changes that affect the community's shared appearance.

Interior kitchen cabinet replacement is not within the scope of the foundation's review. Removing and replacing all cabinet boxes, changing the door style, or reconfiguring an interior layout does not trigger a foundation application. The work stays inside the home's envelope and does not alter the exterior.

Many Martins Landing residents ask whether they need foundation approval before scheduling a free estimate for interior cabinetry. For interior cabinet work, the answer is no. The project proceeds on the homeowner's own timeline. A condo owner at Martin Lakes should also check any building-specific condo association documents, since condo bylaws can include interior renovation requirements that go beyond the foundation's exterior review scope.

White shaker uppers over grey-blue base cabinets and island, matte black pulls, subway tile and a farmhouse sink.

North Shore: the oldest and most compact kitchens

The North Shore section is the original Martins Landing subdivision, platted along the Chattahoochee River in the early 1970s. Its split-level and ranch floor plans predate the colonial sections that followed, and the kitchen sizes in North Shore reflect the design assumptions of that era: a working kitchen sized for the appliances of its time, not for an open layout or a large island.

A North Shore kitchen footprint is noticeably smaller than what a homeowner in one of the later colonial sections would consider typical. The original boxes in the oldest North Shore homes were installed when the community was first built, and most are past the point where refacing makes sense. The substrate, the drawer slides, and the box joints reflect the materials of that construction era.

A full replacement in a North Shore kitchen typically involves more careful measurement than in the later sections, because split-level wall dimensions and ceiling heights do not always match standard semi-custom line increments. Filler pieces at wall returns and custom-width units at run ends are more common here. Plywood box construction is the right call: Georgia summers put particleboard joints under sustained humidity stress, and a plywood box holds fasteners and resists swelling better through repeated seasonal cycles.

Matching cabinet spec to housing type in Martins Landing

The choice between refacing, semi-custom replacement, and a custom order maps directly onto the housing type. Refacing fits a patio home or condo where the boxes are still square and plumb, the drawer slides run smoothly, there is no water damage at the sink base, and the layout serves the household. An original 1980s kitchen in Lakeview with sound boxes but dated oak doors and worn hardware is a strong candidate for refacing: a complete visual change without touching walls or plumbing.

Semi-custom replacement fits the detached colonials in the later Martins Landing sections. Those floor plans were built on standard stud spacing, so a semi-custom line on 3-inch increments fills the runs cleanly with only minor fillers at the ends. Lead time for a semi-custom order typically runs four to eight weeks from order placement.

A custom order fits two situations in Martins Landing: a North Shore kitchen where the split-level floor plan presents non-standard wall returns, and any project where the homeowner is changing the layout. Custom lead times typically run eight to sixteen weeks, and that window needs to be built into the renovation plan before any other trade commits to a date, since the countertop template cannot be scheduled until the base cabinets are set and level.

Galley apartment kitchen with grey shaker cabinets, white quartz counters and subway tile, boxed cabinets stacked beyond the doorway.

Cabinet replacement cost in Martins Landing

Cabinet cost depends first on scope, which tracks the housing type, and second on the grade and specification. A patio home kitchen in the 8 to 12 linear foot range carries a lower total than a colonial kitchen at 18 to 22 linear feet, even at the same installed rate per linear foot.

Refacing runs an estimated $4,500 to $10,500 for a full kitchen, depending on linear footage, door style, and whether drawer fronts are replaced alongside the door fronts. It is the lower-cost path when the existing boxes are structurally sound and the layout works.

Semi-custom replacement installed typically runs an estimated $150 to $700 per linear foot. Custom replacement installed typically runs an estimated $500 to $1,200 per linear foot. A full kitchen replacement can range from roughly $10,000 to $60,000 depending on scope and specification. Within any grade, the choices that move the price are door style (slab costs less than raised panel or inset), box material (plywood costs more than particleboard but holds up better through Georgia summers), drawer count versus door count, and specialty units such as tall pantry cabinets, range hood cabinets, or glass door inserts. Demolition and disposal are separate line items.

All figures shown are estimates for the Martins Landing housing types described; the estimate governs the final cost.

The process

From first call to installed cabinets

Four steps, and you make a decision at the end of each one before the next begins.

  1. Call or send the form

    Tell us about the room and what you want from it, and a local cabinet pro contacts you to talk it through.

  2. Free estimate

    A free estimate for the room, with door style, finish and hardware choices to weigh before you commit.

  3. Decide, then order

    Ask for every cabinet and the lead time to be listed in writing. Nothing is ordered until you decide to go ahead.

  4. Delivery and install

    Boxes are checked on arrival, set level and scribed to the walls, doors adjusted, then a walk-through with you.

Get my free estimate >>

Free estimate from a local cabinet pro. No obligation.

Call (770) 790-5990

Answered 24/7

More cabinet options

Galley apartment kitchen with grey shaker cabinets, white quartz counters and subway tile, boxed cabinets stacked beyond the doorway.Corridor of a new apartment building with paper-covered floors and a white-cabinet kitchen visible through an open door.White raised-panel cabinets set on plywood subtops in a new house kitchen, with a drill and no countertops yet.

Questions

Martins Landing Questions

My Lakeview patio home has a compact kitchen. Is refacing a better choice than full replacement?

For a compact kitchen with sound original boxes, refacing is often the right scope. If the drawer slides run smoothly, the box interiors are dry, and the layout works for the household, replacing the door fronts and drawer fronts changes the entire look without touching walls or plumbing. The free estimate evaluates the existing boxes and produces a price covering both options for your specific kitchen.

Do I need approval from the Martin's Landing Foundation before replacing my kitchen cabinets?

Interior cabinet replacement needs no Martin's Landing Foundation application: the foundation's review covers exterior structural changes, not interior renovation. If you own a unit at Martin Lakes Condos, check any condo association documents specific to your building, since condo bylaws can include interior renovation requirements that go beyond the foundation's exterior review scope.

My North Shore home has the original early-1970s kitchen. What does a replacement typically involve?

North Shore replacements typically involve more custom-width pieces and filler units than replacements in the later colonial sections, because split-level wall dimensions do not always align with standard semi-custom increments. The original boxes in the oldest North Shore homes are past refacing range. Plywood box construction is the right choice because Georgia summer humidity puts sustained stress on particleboard joints through repeated seasonal cycles.

What does cabinet replacement cost for a home in Martins Landing?

Cost depends on housing type, scope, and grade. Refacing runs an estimated $4,500 to $10,500 for a full kitchen. Semi-custom installed runs an estimated $150 to $700 per linear foot. Custom installed runs an estimated $500 to $1,200 per linear foot. A full kitchen replacement can range from roughly $10,000 to $60,000. All figures are estimates; the final price is the one in the estimate you approve at your Martins Landing free estimate.

What is the lead time for a cabinet order in Martins Landing?

Semi-custom orders typically run four to eight weeks from order placement to delivery. Custom orders typically run eight to sixteen weeks. Lead time is confirmed at the free estimate before the order is placed, so the full renovation schedule is known before any other trade commits to a start date. The countertop template follows cabinet installation and adds roughly one to two weeks before the kitchen is fully functional.

Does plywood versus particleboard box construction matter in a Martins Landing home?

It matters in any installation expected to perform through Georgia's humid summers. Plywood holds fasteners more securely and resists swelling better than particleboard. In a North Shore home where the split-level plan adds complexity to the install, specifying plywood box construction is the appropriate call for a result that holds up well through seasonal humidity cycles.

Free estimate

Talk to us about your project in Martins Landing

Tell us about the room, in Roswell or anywhere in the service area, and a local cabinet pro gives you a free estimate, with no obligation.

Get my free estimate >>

Free estimate from a local cabinet pro. No obligation.

Call (770) 790-5990

Answered 24/7

Calls only, we do not receive text messages.

Call (770) 790-5990