Skip to content
Roswell Cabinet House

Built-In Cabinets in Roswell, GA

Built-in cabinets in Roswell replace the fireplace flanking units in 1980s country-club family rooms, sized for today's flat-screen television rather than a tube-TV cavity.

Get my free estimate >>

Free estimate from a local cabinet pro. No obligation.

Get my free estimate

Free estimate from a local cabinet pro. No obligation.

By submitting you agree to be contacted about your project.

Or call (770) 790-5990. Calls only, we do not receive text messages.

Home office wall of soft grey built-in cubby shelves and base cabinets around a built-in desk with crown molding.
Call (770) 790-5990

Answered 24/7

The family rooms in Roswell's country-club communities were built with fireplace flanking units sized for a television that no longer fits the wall. A 65-inch flat panel does not fill a 1980s opening cleanly, and the wiring running to a soundbar has nowhere to hide. For a media built-in, have the designer assess the opening, screen depth, mounting needs and cable route; confirm any wall or electrical work separately.

  • Free estimate from a local pro
  • No obligation to go ahead
  • Semi-custom to full custom

About our built-in cabinets and bookcases

A library or study in a Roswell traditional home raises a second question: the room carries original millwork in a stained hardwood or painted enamel profile, and a bookcase that does not match reads as an afterthought rather than a feature of the house. Getting the match right means formulating a custom stain or paint color against a chip from an unexposed surface. Call Roswell Cabinet House today for a free estimate that starts with what the room already has.

Built-in cabinets in Roswell family rooms

Built-ins that frame the Roswell fireplace without a tube-TV void

The fireplace flanking units built into 1980s Roswell country-club family rooms were sized around a thirty-two inch tube television in a recessed cavity. A flat-screen hangs on the wall, which leaves the old cavity either filled with equipment or empty behind a door. A replacement built-in frames the fireplace at today's scale: open shelving for components, closed storage for what does not need to be visible, and a profile that fits the room.

  • The tube-TV cavity in a 1980s built-in is the wrong depth and width for modern AV equipment.
  • Open upper shelving and closed lower storage is the standard arrangement that keeps the room looking organized.
  • So the built-in works for the room as it is used today, not as it was used in 1985.
Get my free estimate >>

Free estimate from a local cabinet pro. No obligation.

Call (770) 790-5990

Answered 24/7

Built-in bookcase cabinets in Roswell

Roswell built-in bookcases that reach the ceiling without a gap

A built-in that stops below the ceiling in a room that has crown molding leaves a gap that the eye goes to immediately. Ceiling-height bookcases need a scribe molding at the top that accounts for the ceiling variation, because a ceiling that is not level shows a gap at a cabinet that is installed level. In a 1980s Roswell home, ceiling variation across a twelve-foot wall can run a quarter inch or more.

  • A scribe molding at the top of a ceiling-height built-in closes the gap that a level cabinet leaves against an unlevel ceiling.
  • Ceiling variation across a twelve-foot wall in an 1980s home can exceed a quarter inch. A built-in template accounts for that.
  • So the built-in meets the ceiling cleanly instead of leaving a shadow line at the top.
Get my free estimate >>

Free estimate from a local cabinet pro. No obligation.

Call (770) 790-5990

Answered 24/7

Built-in cabinet estimate in Roswell

A built-in quote that names what drives the cost past a stock bookcase

A built-in cabinet costs more than a stock bookcase because it is fitted to the specific wall, finished to match the room's trim, and built with a face frame rather than a box sides-out construction. The estimate should name which of those factors is in the quote and which is not. A furniture-finish painted built-in costs more than a site-painted one; both are acceptable depending on how close the trim match needs to be.

  • Factory-finished built-ins cost more than site-painted. The difference is visible in a high-traffic room with good light.
  • The face-frame construction that makes a built-in look built-in is different from a box-sides-out construction.
  • So you know what is in the quote before comparing it to a stock furniture option.
Get my free estimate >>

Free estimate from a local cabinet pro. No obligation.

Call (770) 790-5990

Answered 24/7

Why Roswell Cabinet House

How to plan your project

Tell us about the room and a local cabinet pro gives you a free estimate, with no obligation to go ahead.

FreeAn estimate from a local cabinet pro, with no obligation
Line by lineAsk for every cabinet to be listed in the estimate, so changes stay simple
4 to 16 wksTypical lead time, semi-custom to custom; ask for yours at the estimate
LevelledBoxes shimmed, scribed and checked before the doors go on
Get my free estimate >>

Free estimate from a local cabinet pro. No obligation.

Call (770) 790-5990

Answered 24/7

Family Room Entertainment Centers: Updating the 1980s Flanking Built-In

The television opening in a Horseshoe Bend, Willow Springs or Brookfield family room was designed in the early 1980s for a set roughly 27 to 32 inches wide. A current 65-inch flat panel does not fit that opening without the wall looking unbalanced, and the exposed cable running to a soundbar or streaming device makes the mismatch more visible. The flanking unit that was once a feature of the room becomes the thing a visitor notices first.

Rebuilding the flanking unit addresses both problems at once. The television opening is widened to fit the current screen size. The cabinet depth is adjusted so the panel sits flush with the face of the unit rather than standing out from it. A wire chase is routed inside the stud cavity, running from the television position down to a low-voltage brush plate near the baseboard, so power and signal cables exit at floor level and are never visible on the wall face. The drywall openings for the chase are patched as part of the installation scope.

The wood species and finish on the original flanking unit vary by builder and year. Painted white raised-panel doors and stained colonial maple were both common in these communities through the 1985 to 1995 range. Matching a 30-year-old finish requires a custom-formulated color pulled from an interior surface chip rather than a catalog selection, because the original factory color has shifted with age and with accumulated coats of touch-up paint.

Library and Study Bookcases in Traditional Roswell Homes

A formal study or library in a Roswell traditional home often carries interior millwork from construction: crown profiles and casings in a stained hardwood or a painted enamel chosen to coordinate with the rest of the house. A bookcase that does not follow those profiles reads as an addition rather than a permanent feature of the room. The cornice capping the bookcase has to follow the same profile as the existing ceiling trim, or the unit looks applied rather than built in.

The traditional homes in Brookfield and Horseshoe Bend from the 1980s commonly carried millwork in colonial maple or red oak. Both species remain available. Rift-sawn white oak is now frequently requested in renovation work, but its grain pattern looks different from flat-sawn red oak at close range, and placing both in adjacent rooms shows the difference clearly. If the existing millwork stays, the new bookcase is ordered in the same species, grain direction and finish profile. Adjustable shelves, glass door inserts on the upper section and integrated under-shelf lighting are common additions and are specified at the design stage alongside the rest of the order.

Warm white built-in bookcases with lit wood-backed shelves flanking a wall-mounted television and linear fireplace.

Built-In Mudroom Systems at the Garage Entry

The garage entry of a large Roswell home handles coats, bags, shoes and equipment every day, and the walls around a garage door frame are often angled or offset in a way that freestanding furniture cannot fill cleanly. A built-in locker system with closed upper cabinets, an open cubby at mid-height and a bench with shoe storage below fits the actual wall dimensions rather than a standard unit width. Cubby openings typically run 12 to 15 inches wide and the bench sits typically 18 to 20 inches from the floor, both confirmed at the free estimate based on how the entry is used.

Specifying a mudroom locker system in the same order as a kitchen renovation shares one finish run: the stain batch or paint batch applies to both in a single factory pass, so the mudroom doors match the kitchen doors in color, sheen and profile. The locker door profile, shaker or raised panel or slab, is selected at the design stage to match the kitchen door profile already in the order, so the garage entry reads as a continuation of the kitchen renovation rather than a separate project added later. Walls at a garage entry are sometimes concrete block or drywall over concrete, which changes the fastening method and is confirmed at the free estimate before fabrication begins.

Built-In Cabinet Cost in Roswell, GA

The cost of a built-in depends on the grade of the cabinet line, the door style, the wood species or painted finish, box construction and any specialty work the scope requires. A semi-custom built-in runs an estimated $150 to $700 per linear foot installed. A custom order with a matched cornice profile and a custom-formulated finish runs an estimated $500 to $1,200 per linear foot. A full custom project across a large family room wall runs an estimated $10,000 to $60,000 depending on scope and materials.

Door style moves the price within any grade: a slab door costs less to fabricate than a shaker, a raised panel costs more than a shaker, and an inset door carries the highest fabrication cost because the fit tolerances are tighter. Plywood box construction holds fasteners better than particleboard in Georgia's humid summers and costs more per box. Specialty elements including a custom cornice match, glass door inserts, integrated under-shelf lighting and wire-chase routing inside the wall are each a separate line item.

Demolition of an existing built-in unit, wall patching and any electrical work in the affected wall are additional labor items. Lead time for a semi-custom order runs roughly four to eight weeks; a custom order runs roughly eight to sixteen weeks. These figures are estimates for built-in cabinets in Roswell, GA, subject to change, and the final price is the one in the estimate you approve.

The process

From first call to installed cabinets

Four steps, and you make a decision at the end of each one before the next begins.

  1. Call or send the form

    Tell us about the room and what you want from it, and a local cabinet pro contacts you to talk it through.

  2. Free estimate

    A free estimate for the room, with door style, finish and hardware choices to weigh before you commit.

  3. Decide, then order

    Ask for every cabinet and the lead time to be listed in writing. Nothing is ordered until you decide to go ahead.

  4. Delivery and install

    Boxes are checked on arrival, set level and scribed to the walls, doors adjusted, then a walk-through with you.

Get my free estimate >>

Free estimate from a local cabinet pro. No obligation.

Call (770) 790-5990

Answered 24/7

More cabinet options

Galley apartment kitchen with grey shaker cabinets, white quartz counters and subway tile, boxed cabinets stacked beyond the doorway.Corridor of a new apartment building with paper-covered floors and a white-cabinet kitchen visible through an open door.White raised-panel cabinets set on plywood subtops in a new house kitchen, with a drill and no countertops yet.

Questions

Built-In Cabinets and Bookcases: Common Questions

What does a custom built-in cabinet or bookcase cost in Roswell?

The cost depends on the size of the unit, the door style, wood species or painted finish, box construction and specialty work such as a custom cornice or wire-chase installation. A semi-custom built-in runs an estimated $150 to $700 per linear foot installed. A custom order with a finish matched to existing millwork runs an estimated $500 to $1,200 per linear foot. All figures listed are planning estimates for built-in cabinetry; the estimate, once confirmed, is the number that binds.

Can you match the stain or paint finish on my existing millwork and trim?

Yes, with a sample. The correct approach is to pull a chip from an unexposed surface in the room, such as the back of a door casing, and formulate a custom color against it at a finish shop. Grain direction is part of the specification: rift-sawn and flat-sawn boards of the same species look different side by side, so orientation is matched alongside color.

Can you rebuild just the television opening, or does the whole flanking unit need to be replaced?

Either scope is possible. If the flanking shelves are structurally sound and the finish is in good condition, widening the opening alone may produce the result you want. If the unit is dated, the finish is worn or the wall proportion needs to change to suit the current screen size, rebuilding the complete flanking unit gives a cleaner result. Both options are evaluated and priced at the free estimate.

What is a wire chase and does installing one require opening the wall?

A wire chase is a cavity inside the wall, between the studs, that routes power and signal cables from the television position down to a low-voltage plate near the baseboard. Installing one requires two small drywall openings: one at the television position and one near the baseboard. The cables thread through the stud cavity, the openings are patched with low-voltage brush plates, and the finished wall shows no exposed cable.

Does a written warranty come with a built-in cabinet order?

Yes. Ask whether the order comes with a written warranty and where its terms are set out. Ask for the current written warranty terms at the free estimate, before any order is placed.

Free estimate

Talk to us about built-in cabinets and bookcases

Tell us about the room, in Roswell or anywhere in the service area, and a local cabinet pro gives you a free estimate, with no obligation.

Get my free estimate >>

Free estimate from a local cabinet pro. No obligation.

Call (770) 790-5990

Answered 24/7

Calls only, we do not receive text messages.

Call (770) 790-5990